Silvia Club of NSW https://forum.silviansw.com/ |
|
new diff + universal/tailshaft costs https://forum.silviansw.com/viewtopic.php?f=4&t=29845 |
Page 1 of 1 |
Author: | Varvs [ Tue Jan 29, 2008 10:38 am ] |
Post subject: | new diff + universal/tailshaft costs |
Im looking at buying a 180sx. Ive come across one that is fairly well maintained on the inside and outside, with very little damage to paint work and a fresh interior, however it has a noisy diff, and a really bad universal joint on the tailshaft which is knocking on gear shifts. the car is priced fairly cheap ($8500) and Im wondering if its worth buying it and having these things replaced. The current market price seems to be around the 10-11k mark, and looking at the cost of these parts from wreckers and parts dealers, a nismo LSD goes for $1k new and the tail shaft anywhere from $100 to $300 used. Then theres the cost of labor as well. It seems to be hard to get a car that is both well maintained appearance/interior wise with a good drivetrain. Pretty much every car I have looked at (except for one in a color I dont like) has been thrashed but kept clean inside and out, or has been driven by a grandma and has more dings than the vietnamese phonebook. The car im looking at also has ABS, and apparently they use a different tailshaft to non-ABS cars. is this true? |
Author: | JC [ Tue Jan 29, 2008 4:50 pm ] |
Post subject: | |
When I was in the market for an s13 non turbo, it needed a new diff. I was told a r200 diff would be the go, expect around $500 for that item. Hope that helps. |
Author: | Blakesilvia [ Tue Jan 29, 2008 5:52 pm ] |
Post subject: | |
R200 diff around 400 2 Way LSD - $900 shim the diff : 250 Lock it : 100 or free if you know of a more dodgier way. |
Author: | fergo308 [ Tue Jan 29, 2008 7:02 pm ] |
Post subject: | |
you can get a nsimo lsd kit new for $1000? where from,get me one too!!! I paid $1900 for mine the other month when the 'rebuilt' GTR diff I bought from a member on here started clunking badly and whining like a school kid in the junk food aisle of woolies. ABS tailshafts are a different length,as well as having a different flange. locating a 2nd hand one through a wrecker or on here shouldn't be too hard. Justin... |
Author: | Mr Bean [ Tue Jan 29, 2008 7:50 pm ] |
Post subject: | |
$250 to shim a diff? the parts are bout $8 each x2... |
Author: | Blakesilvia [ Tue Jan 29, 2008 8:55 pm ] |
Post subject: | |
Mr Bean wrote: $250 to shim a diff? the parts are bout $8 each x2...
Labour? fuck doing it your self.. Plus.. That's a reference to how much and under you should pay. |
Author: | Mr Bean [ Tue Jan 29, 2008 9:17 pm ] |
Post subject: | |
ahh i didnt factor labour. i do it myself |
Page 1 of 1 | All times are UTC + 10 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |