never heard of anyone breaking in a turbo with anything other then boost + fun
| Silvia Club of NSW https://forum.silviansw.com/ |
|
| Turbo run in https://forum.silviansw.com/viewtopic.php?f=1&t=21683 |
Page 1 of 1 |
| Author: | 182Go [ Thu Mar 30, 2006 12:23 pm ] |
| Post subject: | Turbo run in |
The car is in the shop this week getting new exhaust manifold, dump, metal cat etc etc etc, basically everything off the head is new including the turbo. Will the new steam pipe manifold etc etc etc need any special treatment to bed it in or just go for broke. Same question for the turbo (it is a BB turbo). |
|
| Author: | Turbo_Brian [ Thu Mar 30, 2006 1:44 pm ] |
| Post subject: | |
I didn't have to..... B. |
|
| Author: | badhairdave [ Thu Mar 30, 2006 2:17 pm ] |
| Post subject: | |
Just basics really: Make sure the manifold is clean inside and install it. Make sure the turbo is getting oil then give it hell. |
|
| Author: | 182Go [ Thu Mar 30, 2006 2:53 pm ] |
| Post subject: | |
badhairdave wrote: Just basics really:
Make sure the manifold is clean inside and install it. Make sure the turbo is getting oil then give it hell. The exhaust shop are doing the lot, make and fit, I just have to drive it home (kind of feel funny not doing any of the work) |
|
| Author: | mokompri [ Fri Mar 31, 2006 6:41 pm ] |
| Post subject: | |
never heard of anyone breaking in a turbo with anything other then boost + fun
|
|
| Author: | 182Go [ Tue Apr 04, 2006 9:51 am ] |
| Post subject: | |
Thanks for the feed back guys, I will still need to get my tune right before I start testing any limits of the turbo. I will also need to make sure I don't have any nasty unexpected lean outs either (exceed injector duty cycle), so I plan on creeping up on its potential. Once I get the car back, next job on the list FMC. |
|
| Page 1 of 1 | All times are UTC + 10 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|