Silvia Club of NSW
https://forum.silviansw.com/

chasing for 220-240kw from S15.. what turbo??
https://forum.silviansw.com/viewtopic.php?f=1&t=29881		 Page 2 of 8
Author:  ClutchRot [ Mon Mar 10, 2008 12:28 am ]
Post subject: 
the disco potato is a GT28RS, whereas the GT-RS is an HKS turbo.

The GT-RS is big and laggy, with around a 250rwkw peak.
The GT28RS is much closer to the stock T28, with around a 220rwkw peak.
Author:  chindodood [ Mon Mar 10, 2008 10:52 am ]
Post subject: 
ok now i get it :D
my baddd..
________
SHIP SALE
Author:  splashman [ Mon Mar 10, 2008 4:03 pm ]
Post subject: 
I still don't think you get it, but you're pointing in the right direction now.
Author:  chindodood [ Mon Mar 10, 2008 5:46 pm ]
Post subject: 
got confused between the garrett n the hks
cause both of them soudns teh same

gt28rs - garrett
n gtrs -hks
Author:  JayS14 [ Tue Mar 11, 2008 8:37 pm ]
Post subject: 
chindodood wrote:
got confused between the garrett n the hks
cause both of them soudns teh same
Your confused now wait till you see one that has Garret and HKS written on it :P
Author:  marshy [ Fri Apr 04, 2008 4:02 pm ]
Post subject: 
i decided to go with the gt2871R as i am also getting cams, so hopefully it will be a good combo.

ill let you know the results when i get the car back
________
Extreme Vaporizer
Author:  LISTEN 180SX [ Fri Apr 04, 2008 4:14 pm ]
Post subject: 
which cams marshy?
Author:  marshy [ Fri Apr 04, 2008 4:56 pm ]
Post subject: 
well they are from unigroup, they have pretty much tweeked the tomei pon cams, dont know the exact specs, i got them written down somewhere but im pretty sure they are a 256-258 in and ex with about a 10.5 lift.

they are going to make the car a little grumpy down low but mid range will be about the same as std cams and they only get better from there up. :D
Author:  LISTEN 180SX [ Sat Apr 05, 2008 8:56 pm ]
Post subject: 
^ I've got the same cams from Yavuz in my S15 too :)

very curious to see how it goes with the turbo as my next step is turbo too. Yavuz is very excited for me to upgrade the turbo so he can see what he can get out of it with those cams, so i guess he'll find out on your car first!

Keep me/us posted please mate!
Author:  splashman [ Sat Apr 05, 2008 10:48 pm ]
Post subject: 
Are you guys referring to "camtech" cams?
Author:  LISTEN 180SX [ Sun Apr 06, 2008 1:16 am ]
Post subject: 
they're the blanks that they start with... then they are custom ground to Unigroup/Yavus' own specifications...
Author:  too_much_boost [ Sun Apr 06, 2008 8:15 am ]
Post subject: 
How much is yavuz selling these cams for?
Author:  fergo308 [ Sun Apr 06, 2008 11:38 am ]
Post subject: 
be very careful with camtech cams. they're regrinds.


Justin...
Author:  marshy [ Sun Apr 06, 2008 1:21 pm ]
Post subject: 
are they camtech cams?? what do i need to be carefull about.
Author:  splashman [ Sun Apr 06, 2008 1:50 pm ]
Post subject: 
Camtech offer to reground stock cams, or machine new billet items.

I'd be finding out which one of these options was chosen in your case.

As far as I'm aware, the main problem with "reground" cams is in the hardening process. I can't speak for camtech as I'm unaware of their exact process, but most reground cams are only flamed hardened after the final grind, which only hardens a few thou deep.

Flame hardening should be done before the final grind and then again after the final grind, but this requires them to set the grind up twice, thus more time consuming and expensive.

I'm not 100% sure if thats correct, but I think the basic idea is there.
Page 2 of 8 All times are UTC + 10 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/