Silvia Club of NSW
https://forum.silviansw.com/

FPV insiders admit a 400kW blown V8-powered GTHO FG
https://forum.silviansw.com/viewtopic.php?f=6&t=31128
Page 1 of 1

Author:  buzzme [ Wed Jun 25, 2008 9:51 pm ]
Post subject:  FPV insiders admit a 400kW blown V8-powered GTHO FG

Quote:
FPV insiders admit a 400kW blown V8-powered GTHO was part of the FG Falcon plan

By JAMES STANFORD 15 April 2008
FORD’S legendary GTHO nameplate was meant to have been launched as a halo for the all-new FG Falcon-based Ford Performance Vehicles (FPV) range next month, but the program was aborted due to cost.

GoAuto can exclusively reveal the FPV GTHO proposal included the development of a supercharged version of the 5.4-litre Boss V8 that would generate as much as 400kW.

FPV sources have revealed the plan was scrapped largely because of cost issues, as both FPV and Ford felt the limited volume could not justify the development and warranty coverage costs for the vehicle.

The vehicles had not progressed to the prototype stage before the bean counters crunched the program.

The failed GTHO Falcon plan has left FPV without a rival for the 7.0-litre Holden Special Vehicles W427, which will generate a whopping 370kW of power and 640Nm of torque.

FPV sources have told GoAuto that the company had considered a GTHO program for the 2002 BA range, but the plan did not progress far.

The FG GTHO proposal was far more advanced, but hinged on the use of a supercharged version of the Boss V8 to give the car a significant performance advantage over the standard GT.

When the supercharged V8 business case fell over, so did plans for the FG GTHO. “Unless you can do the HO properly, you don’t do it at all,” said the source. “We needed 380kW or 400kW to be competitive or else you just wouldn’t bother.”

Ford Super Roo and the original Ford Falcon XY GTHO.

While Blue Oval fans will be devastated that accountants have denied them a full-blown FG GTHO, there is hope for a future version, complete with iconic Super Roo livery which has remained in the Blue Oval vault since 1972.

FPV managing director Rod Barrett has told GoAuto that he is constantly thinking about building an HO model, but has not formulated a proposal. “I have a vision, which hasn’t gone to concept yet,” he said.

“If a GTHO was to come back it needs to be the right car for the right moment, and FPV wouldn’t do a GTHO unless it was the most iconic FPV and Ford ever built. There is too much heritage in the car.

“The HO is probably the closest thing to heaven for a Ford fan in religious terms, so it would be sacrilege to do anything less than the ultimate.”

GoAuto understands the GTHO would not use the current 5.4-litre Boss engine, which combines imported parts with local components and is pieced together by FPV in Campbellfield.

This ageing engine is due to be phased out around 2010 or 2011.

It will be replaced by a 5.0-litre direct-injection V8 from a new family of Ford engines, which will also be used by the Mustang in the US. As well as featuring in FPV vehicles, a version of the engine is also likely to be used for Ford XR8 Falcons.

Ford Australia and FPV will be able to take the new engine straight off the shelf instead of hand-building them, a change that would cut production costs significantly.

A boosted version of this engine, which is likely to be developed for high-performance Mustang variants, would provide the perfect powerplant for a GTHO model.

If the GTHO survives the business case this time around, it is almost certain to wear the Super Roo logo, which features a tyre-smoking kangaroo and was first introduced on the XW GT 351 of 1969.

GoAuto understands FPV is saving the Super Roo logo for the GTHO.

“It will be used when the time is right to use it,” Mr Barrett said.

The FG GTHO project was long dead before Mr Barrett joined FPV in July last year.

A special-edition Falcon GT released four months before Mr Barrett arrived at FPV came close to wearing the Super Roo logo. The 40th Anniversary GT, which was painted black and ran gold stripes over the bonnet, roof and boot, was initially meant to wear Super Roo logos but cost-related issues saw the decals removed.

While Ford Australia was not prepared to push through with a supercharged GTHO for the FG range, Melbourne tuning house Herrod Motorsport already builds its own versions.

The respected engine tuner offers intercooled supercharged kits using a Yella Terra Whipple supercharger that runs at 9 to 10psi boost for Falcon BA and BF V8s.

The $14,000 upgrade lifts the output of a standard XR8 Boss 260 to a healthy 390kW and around 580Nm. Fitting the kit to the Boss 290 V8 yields around 400kW and 600Nm.

Herrod Motorsports even fits the upgraded engines with a special engine badge that reads GT-HO or XR8-HO, with ‘Herrod’ written beneath the H and ‘Option’ written bellow the O.

Herrod Motorsports knew Ford and FPV were considering a boosted HO for the FG program and put together a proposal to do the engine work for the proposed high-performance model which did not materialise.



http://www.goauto.com.au/Mellor/Mellor. ... 2C001C726F

Author:  tehyoungone [ Wed Jun 25, 2008 9:52 pm ]
Post subject: 

Damn. That would be nuts!

Author:  fergo308 [ Wed Jun 25, 2008 10:48 pm ]
Post subject:  Re: FPV insiders admit a 400kW blown V8-powered GTHO FG

buzzme wrote:
[
GoAuto can exclusively reveal the FPV GTHO proposal included the development of a supercharged version of the 5.4-litre Boss V8 that would generate as much as 400kW.


I've highlighted the key word in that entire article. proposals are one thing,production models are another. apparently nissan Australia are going to sell the new GTR here too. when I see one in a dealership,new,with warranty,I'll believe it. until then,it's all piss in the wind. this car is the same.


Justin...

Author:  Scotty MYS13Q [ Sat Jul 12, 2008 7:09 am ]
Post subject: 

lol like to see that thing go :D

Author:  Mr Bean [ Mon Jul 14, 2008 6:44 pm ]
Post subject: 

ive been in dick johnson's herrod kitted xr8.. it goe's NICE to say the least.... this will never happen because ford motor co is to soft.

Author:  von clutch [ Sun Jul 27, 2008 11:21 pm ]
Post subject: 

what a weapon id like 2 see what holdens goin 2 do about that :wink:

Author:  SamBo [ Thu Aug 28, 2008 1:54 pm ]
Post subject: 

von clutch wrote:
what a weapon id like 2 see what holdens goin 2 do about that :wink:

who cares?

Author:  MAXBOOST [ Thu Aug 28, 2008 2:32 pm ]
Post subject: 

von clutch wrote:
what a weapon id like 2 see what holdens goin 2 do about that :wink:


If the ford were to go into production, and holden bothered with a contender, they'd do the same thing they always have, bigger block not less weight.. Boring

Author:  tim200sx [ Tue Sep 02, 2008 1:38 pm ]
Post subject:  ford

Mr Bean wrote:
ive been in dick johnson's herrod kitted xr8.. it goe's NICE to say the least.... this will never happen because ford motor co is to soft.




i agree with ryan ford co is to soft... i'll beleave it when i see it.

Page 1 of 1 All times are UTC + 10 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/