| Silvia Club of NSW https://forum.silviansw.com/ |
|
| seat belt problems https://forum.silviansw.com/viewtopic.php?f=4&t=30896 |
Page 1 of 1 |
| Author: | bert_ [ Wed May 21, 2008 7:13 pm ] |
| Post subject: | seat belt problems |
hey guys, i had to get my rear seatbelts replaced. so i went to the wrckers and bought a pair. there out of a 97 model 180sx (mines 93 model) wen i put them in the problem is i cant pull the seat belt out. does any one know why this may happen? i cant pull the belt out. any help is appreciated. thanks. |
|
| Author: | PH11PS [ Wed May 28, 2008 6:11 pm ] |
| Post subject: | |
do u mean ur seat belt strap is locked or is it not retracting? |
|
| Author: | da12nv [ Sun Jun 08, 2008 3:08 pm ] |
| Post subject: | |
you need to pull it very very gently a little bit at a time i had the same prob with my seatbelt in my s14 and it took ages to get it out |
|
| Author: | nissanpower [ Sun Jun 08, 2008 9:33 pm ] |
| Post subject: | |
If you bought them from a wrecker chances are they could be the original Nissan belts, not the compliance seatbelts. (Check the tags to see if they are Nissan or Klippan) If they are Nissan belts they need to be mounted right onto the car pointing diagonally to the roof to be able to retract. IF they are Klippan belts they are mounted on a bracket to make the reel face the front windscreen. Basically they need to be mounted correctly to retract. And make sure your car is on level ground. |
|
| Author: | bert_ [ Mon Jun 09, 2008 1:41 am ] |
| Post subject: | |
their original nissan. i found out htey need to be mounted properly. but i dont know how to mount them onto the car so its right? |
|
| Author: | PingBoy [ Mon Jun 09, 2008 12:44 pm ] |
| Post subject: | |
Legally you shouldn't be able to buy second hand seatbelts anyway. New aftermarket ones really aren't expensive. |
|
| Author: | bert_ [ Mon Jun 09, 2008 1:22 pm ] |
| Post subject: | |
how much roughly would the aftermarket ones cost? i couldnt find them around so i had to go wreckers.. |
|
| Author: | DV5180 [ Sun Dec 14, 2008 4:19 pm ] |
| Post subject: | |
just wondering how you went with this. my seatbelt doesnt rewtract properly. very slow and loose. anyone have any suggestions? |
|
| Author: | bert_ [ Sun Dec 14, 2008 4:23 pm ] |
| Post subject: | |
i just bought a second hand pair. you mgiht be able to goto a spare parts store like autobarn,supercheap,repco, etc etc to get a brand new pair and replace them. company that makes it is called klippan. |
|
| Author: | d0p3y [ Sun Dec 14, 2008 5:06 pm ] |
| Post subject: | |
bert_ wrote: how much roughly would the aftermarket ones cost? i couldnt find them around so i had to go wreckers..
I just bought new ones for my S14 through http://www.autolivaftermarket.com.au/ (ordered from my local Bursons store - Repco, Autobarn and Auto One also sell them I think- check website) they are the Klippan brand and cost around $100 each including new bracket. |
|
| Author: | bert_ [ Sun Dec 14, 2008 7:21 pm ] |
| Post subject: | |
lol i bought my 2nd hand ones for 80 bux the pair with brackets and bolts to go with, but i guess its abit risky to buy 2nd hand seat belts. |
|
| Page 1 of 1 | All times are UTC + 10 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|