Silvia Club of NSW

Hi, has anyone removed the factory front bar from their 180?

I removed 4 clips and 4 bolts from the front but it seems to be held on from the sides.

Does anyone know what are the other bolts that need to be removed?

Thanks

i'm assuming you've removed the top and bolts.
as well as the clips at the bottom of the bar.

you will need to take your rims out and the fenders.
you need a long socket 10mm with a long extension.
there are four each side off the bar.

if you've got factory intercooler they're a bitch to take out.

once you've done it once its piss easy.
its just the hassel of removing the tyres and fenders....

click here ..
http://www.revriteperformance.com/conve ... ications_1

pic 9 and pic 10 sorta shows ya where the screws are on the side.
their a bitch to take out as they are screwed from the inside...

like i said once you've done it once you'll think to yourself how easy it is to do..



hope that helps..

_________________
Officer ! I swear its all factory standard.

geez.. sounds like an annoying job

anyway ill give it a go

thanks

it is.

without the extension its almost imposible to take it out.
i've got a 45cm extension so its easier...

_________________
Officer ! I swear its all factory standard.