hi guys and gals
i have a 180 and i'd like to know how to remove the speed limiter 
| Silvia Club of NSW https://forum.silviansw.com/ |
|
| im new and have a question https://forum.silviansw.com/viewtopic.php?f=4&t=1802 |
Page 1 of 1 |
| Author: | madnss [ Thu Oct 31, 2002 12:09 am ] |
| Post subject: | im new and have a question |
hi guys and gals i have a 180 and i'd like to know how to remove the speed limiter
|
|
| Author: | DumHed [ Thu Oct 31, 2002 12:45 am ] |
| Post subject: | |
there's the dodgy way, which is to cut the speed sensor cable to the ECU, which can cause the occasional problem, like stalling at the lights if you slow down rapidly, etc, or you buy a speed limit remover (my preference being the Pivot Speed Meter-X, which gives you a digital speedo and 1/4 mile timer too), or you get a re programmable daughterboard for the ECU and remove the limiter in the software. I've done both the last two, but the first might work ok, especially if you have it on a switch so you can leave it on most of the time. |
|
| Author: | SR180Sx [ Thu Oct 31, 2002 2:08 am ] |
| Post subject: | |
welcome mate!!!!!! u should find this site pretty useful, everyone here are complete champs!!!!!! *sucks up* 
have u got n e pics of ur ride mate?????????? |
|
| Author: | white180sx [ Thu Oct 31, 2002 6:14 pm ] |
| Post subject: | |
i like that switch idea DUMHEAD. please explain more. where is the wire. switch it when you wanna go over 180kmh maddness.
SHOW me the WIRE ...
|
|
| Author: | madnss [ Thu Oct 31, 2002 11:15 pm ] |
| Post subject: | |
http://groups.msn.com/BENNYSCARSTUFF/themadnss180sx.msnw thats the pic's
and yeah that switch idea sounds the go, so which wire is it 
Quote: or you get a re programmable daughterboard for the ECU and remove the limiter in the software.
or where can i get this? |
|
| Author: | JCKASS [ Thu Oct 31, 2002 11:48 pm ] |
| Post subject: | |
...or the NON dodgy way is to by an Apexi RSM or a speed limit defender or so.. |
|
| Author: | Lawsy [ Fri Nov 01, 2002 9:29 am ] |
| Post subject: | |
The daughterboard way is the least dodgy. No wiring changes and you can actually choose the value for the limiters over and over again. For example when my sister borrowed the car I put the speed limit to 105km/h and the rev limit to 6500rpm. Have the speed limit gone and the rev limit changed for my normal driving, all is good. Go the daughterboard! |
|
| Author: | SR180Sx [ Fri Nov 01, 2002 1:43 pm ] |
| Post subject: | |
how do u actually set the speed/rev limitters???? is there a screen on them or something???? that sounds really good, so is every1 happy who got the daughterboard?? how was it to be programmed in???? i know how to install, but i just dunno how to program it??????
|
|
| Author: | Lawsy [ Fri Nov 01, 2002 2:21 pm ] |
| Post subject: | |
Have a look at my site: www.geocities.com/s13silviatuning/theor ... uired.html down the bottom of that page is a link to download the ecu editing software. Its called ROMEDIT, download the address file and the SR20DET file, load them up and go to "global" that is where you change the limits. File is burnt onto daughterboard chips, can be reburnt as many times as you want. Better instructions on the page.
|
|
| Page 1 of 1 | All times are UTC + 10 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|