Silvia Club of NSW https://forum.silviansw.com/ |
|
G-tech time https://forum.silviansw.com/viewtopic.php?f=4&t=1422 |
Page 1 of 1 |
Author: | sn00p [ Fri Sep 20, 2002 10:48 am ] |
Post subject: | G-tech time |
I ran a 14.27 @153 km/h on a g-tech last night the road wansnt perfectly straight, with full zorst & 10 psi is this any good? I only had 2 runs with it. |
Author: | white180sx [ Fri Sep 20, 2002 12:31 pm ] |
Post subject: | |
sounds pretty good to me. whats the stock standard figures on the 180sx anyways. I think claimed 6.18 0-100 and 14.2 qrtrs But that was prolly taken on the most perfect weather, perfect launch, perfect shifts after 100 times of trying ???? 14.2 - i thinlk thats pretty good. |
Author: | Lawsy [ Fri Sep 20, 2002 2:24 pm ] |
Post subject: | |
From what i've read, in terms of quarter miles, all stock figures: CA18DE S13: ~17.0 CA18DET S13: ~15.0 SR20DE S13: ~16.5 SR20DET S13: ~14.5 jap spec S14: ~14.2 jap spec S15: ~13.8 aus spec S14 & S15: ~14.7 |
Author: | EXQS_ME [ Fri Sep 20, 2002 7:07 pm ] |
Post subject: | |
Thats not too bad mate.. would have thought your speed should have been around 160km/h tho.. Maybe the road had something to do with it, let me know next time your doing them, i should have my pump fixed by then |
Author: | L Plater [ Tue Oct 01, 2002 8:00 pm ] |
Post subject: | |
My ca18de auto g-teched at 18.09 in power mode etc. But I'm putting in a rb20 at the moment so it should be all good afterwards! |
Author: | shpeedie [ Thu Oct 10, 2002 9:24 pm ] |
Post subject: | |
Has anyone got a Gtech they can being to the dyno day .. i noticed a nice long straightish road outside the place |
Author: | EXQS_ME [ Thu Oct 10, 2002 10:35 pm ] |
Post subject: | |
Now THATS thinking mate !! |
Author: | DumHed [ Thu Oct 10, 2002 10:52 pm ] |
Post subject: | |
yeah, someone get one! otherwise we could try to connect my pivot speed meter to people's cars... not fun though.. |
Author: | sn00p [ Fri Oct 11, 2002 10:06 am ] |
Post subject: | |
Dumhed what 1/4 mile time do u get with that speed meter? |
Author: | DumHed [ Fri Oct 11, 2002 10:32 am ] |
Post subject: | |
I haven't found anywhere that good to try it (and my car's not exactly a straight line weapon ) so I haven't done it properly, but with 2 people, a bogged down start and backing off just before the end (corner!) I got 15.98... I've done a few decent 0-100m time runs, with the best being 6.99. No one else does 100m so it's not much use, but it works out pretty close to 0-100km/h |
Author: | SNOOPN [ Fri Oct 11, 2002 12:16 pm ] |
Post subject: | |
I pulled a 14.93 @ 93mph when my car was stock... no exhaust or anything. It is a CA18DET, auto. Was happy at the time. Haven't tried since the turbo and exhaust mods. My friends with his stock 2.0 S-13 manual pulled 14.2 with a cat back and 10psi. |
Author: | DumHed [ Fri Oct 11, 2002 12:52 pm ] |
Post subject: | |
mine's N/A (SR20) btw |
Author: | EXQS_ME [ Fri Oct 11, 2002 6:53 pm ] |
Post subject: | |
Well if i could get my type-1 hks turbo timer to be accurate maybe i wouldnt need a g-tech either... be damned if i know why its so inaccurate.. at 140km/h on dash the timer is reading 130 i think my speedo is out 3-4% because of the 65 profile tyres (the dealer put them on, not me..) but still, thats too much to give any sort of accuracy for a 1/4mile time. |
Author: | DumHed [ Fri Oct 11, 2002 7:09 pm ] |
Post subject: | |
mine's out by 10km/h at those speeds too.. (the dash speedo overreads) but the Pivot is dead accurate compared to GPS, so I believe it. |
Author: | EXQS_ME [ Fri Oct 11, 2002 10:01 pm ] |
Post subject: | |
Well maybe i should give the hks a go then im resetting the ecu tonight so i better give it a bit of a thrashing on the way haha |
Page 1 of 1 | All times are UTC + 10 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |