i was running 14.5 PSI with the same mods but i was using AVCR B/C and made good pwr and no problems.
now i run 20psi all day every day after rebuild and im loving it...
| Silvia Club of NSW https://forum.silviansw.com/ |
|
| safe boost level? https://forum.silviansw.com/viewtopic.php?f=3&t=33697 |
Page 1 of 1 |
| Author: | Notorius [ Tue Aug 25, 2009 9:10 pm ] |
| Post subject: | safe boost level? |
hi guys i just bought a hybrid evelctronic boost controller, and my question is what is a safe boost level for a standard sr20det engine?? |
|
| Author: | rk2k9 [ Tue Aug 25, 2009 9:43 pm ] |
| Post subject: | |
15psi ! |
|
| Author: | rusty1 [ Tue Aug 25, 2009 10:55 pm ] |
| Post subject: | |
rk2k9 wrote: 15psi !
Not if its stock |
|
| Author: | JayS14 [ Tue Aug 25, 2009 11:14 pm ] |
| Post subject: | Re: safe boost level? |
Notorius wrote: hi guys i just bought a hybrid evelctronic boost controller, and my question is what is a safe boost level for a standard sr20det engine?? Nothing is safe with hybrid ebc's they over boost all the time.
The one i had a few years ago oerboosted randomly and so did two other people i know ones.. |
|
| Author: | whyte [ Wed Aug 26, 2009 10:33 am ] |
| Post subject: | |
why are you boosting a standard sr? wouldn't it be wise to do exhaust & frontmount/intake first before boost increase. |
|
| Author: | Notorius [ Wed Aug 26, 2009 10:55 am ] |
| Post subject: | |
the engine itself is standard. but i already have intake, front mount, nd full turbo back exhaust. |
|
| Author: | ZEi250t [ Wed Aug 26, 2009 11:07 am ] |
| Post subject: | |
i rekon 13-14psi, anything more and youre gonna risk running out of injectors..... |
|
| Author: | acids14 [ Thu Aug 27, 2009 10:04 am ] |
| Post subject: | |
i was running 14.5 PSI with the same mods but i was using AVCR B/C and made good pwr and no problems. now i run 20psi all day every day after rebuild and im loving it...
|
|
| Author: | harvey_ [ Tue Sep 29, 2009 10:19 pm ] |
| Post subject: | |
i got a blitz boost controller... just finished off the exhuast. So now i have new aftermarket headers, 3" Turboback, Pod filter. How much boost can i safely run? normal boost is 0.75 bar right? After the mods, i tuned to 0.85bar, the car ran extremely well? it scooped smoothly to 0.85bar, but when i tune it back to normal 0.75 bar, it suggles to reach 0.75bar once past about 0.55-0.6bar.... Any help would be nice. 
|
|
| Author: | ZEi250t [ Wed Oct 07, 2009 10:06 am ] |
| Post subject: | |
what you SHOULD do it put it on the dyno, pay your $50 and get them to turn the boost up as far as possible withoug damaging the engine. thats the help youre gonna get
|
|
| Page 1 of 1 | All times are UTC + 10 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|