Silvia Club of NSW
https://forum.silviansw.com/

My New 180SX :) UPDATE: Dyno Sheet pg 2
https://forum.silviansw.com/viewtopic.php?f=24&t=33703
Page 1 of 3

Author:  JDM-RPS13 [ Sat Aug 29, 2009 9:04 pm ]
Post subject:  My New 180SX :) UPDATE: Dyno Sheet pg 2

This is my new baby. 1997 Model Nissan 180SX Type X Anniversary Edition.

I bought it about a year ago, pretty much standard with a cat back exhaust system and a set of UGLY advan tri spoke wheels.

I have since done these mods to it:

Volk TE37 knock off wheels, 18inch (waiting until i can afford the real deal ones) :P
Tein Super Street Coilovers
Garret T28 Ball Bearing Turbo
Z32 AFM
HKS Pod
HKS BOV
Apexi Power FC
Greddy PRofec B Spec II Boost Controller set at 15psi
Cooling Pro Bar and Plate FMIC

The turbo and fmic and tuning was done by Power Tune, and made 198.4rwkw on 15psi. (i will post up dyno sheet tomorrow if i get the chance)

Let me know what you think, or if you have suggestions about mods id love to hear it :)
Image
Image
Image
Image

Author:  too_much_boost [ Sat Aug 29, 2009 11:02 pm ]
Post subject: 

Welcome to the forum.

It looks like you have got the basics of a fun street car there

Before anyone can suggest any future mods, we will need to know what you plan on doing with the car.

Actually, first up should be a brake upgrade.

Author:  JDM-RPS13 [ Sun Aug 30, 2009 3:54 pm ]
Post subject: 

well i plan to in the future get a gt3071R turbo set up for it, and with cams im not exactly sure what to look for in that area, ive looked at Tomei Pon Cams, (for the fact they are a simple bolt on) but i dont know if i should go bigger or not..?
I have been told Stage 2 HKS cams, but it will all come down to the money situation at that time i guess :P

could someone help me, how do i post up some pics on here? im sure if i do a search ill figure it out, but im new to the forums and wouldnt know where to start, thanks in advance :)

Author:  too_much_boost [ Sun Aug 30, 2009 5:06 pm ]
Post subject: 

I probably should been more specific. What are you planning on using the car for?

Author:  JDM-RPS13 [ Sun Aug 30, 2009 9:00 pm ]
Post subject: 

Just street use, im aiming for the 270-280rwkw mark with the 3071R turbo set up with a nice set of mild cams..

Author:  Serial Killa [ Mon Aug 31, 2009 9:08 am ]
Post subject: 

That's a lot of power for street use.

Driving like a tool on the street isn't cool any more, FYI

Upgrade the brakes and take it to the track first

Then see where you are at

Author:  JDM-RPS13 [ Mon Aug 31, 2009 2:21 pm ]
Post subject: 

Im not wanting that power to drive like a dickhead on the street, i want to take it to eastern creek and see what i can get down the 1/4 mile every now and then FYI

Author:  whyte [ Mon Aug 31, 2009 2:26 pm ]
Post subject: 

clean 180 man,

let me guess, powertune recommended you their 3071r turbo upgrade kit?

Author:  rk2k9 [ Mon Aug 31, 2009 7:05 pm ]
Post subject: 

big power for street use and the occasional drag..
poncams are entry level for cams, but its enough for your application
clean car by the way =)

Author:  JDM-RPS13 [ Tue Sep 01, 2009 9:35 am ]
Post subject: 

whyte wrote:
clean 180 man,

let me guess, powertune recommended you their 3071r turbo upgrade kit?

cheers man, haha yeah Kemp, theirs sales rep recommended i go with that turbo setup, Chea the owner of power tune has this set up on his s14, completely standard engine, standard cams, with just bigger injectors, bigger fuel pump and haltec ecu, and made something like 270+ rwkw and did an 11 sec 1/4 mile :P its a freak of a car

Author:  JDM-RPS13 [ Tue Sep 01, 2009 9:37 am ]
Post subject: 

rk2k9 wrote:
big power for street use and the occasional drag..
poncams are entry level for cams, but its enough for your application
clean car by the way =)

cheers man, if i get the chance today ill post up some updated pics of the car and the dyno sheet

Author:  badhairdave [ Tue Sep 01, 2009 10:49 am ]
Post subject: 

Just remember that the 277rwkw power figure was with e85, the PULP figure was 258 from memory.

I'll have my ex gate 3071 results sometime next week. Should be an interesting comparison.

I'm running unigroup spec'd baby cams rather than off the shelf tomei or hks which have been giving some good results lately. I've kept the cams small to try and keep the power band within the stock rev range.

Author:  whyte [ Tue Sep 01, 2009 10:56 am ]
Post subject: 

haha powertune love the 3071r, they recommend it to every SR that comes into the workshop.

Author:  SRS13 [ Tue Sep 01, 2009 11:06 am ]
Post subject: 

badhairdave wrote:
Just remember that the 277rwkw power figure was with e85, the PULP figure was 258 from memory.

I'll have my ex gate 3071 results sometime next week. Should be an interesting comparison.

I'm running unigroup spec'd baby cams rather than off the shelf tomei or hks which have been giving some good results lately. I've kept the cams small to try and keep the power band within the stock rev range.


The 277rwk was also with 22psi.

Dave are you running the T3 version? If it makes good power I would be so tempted...

Upgrade your brakes, get some sway bars, maybe some coilovers or a good spring/shock combo and make it stop and handle. Then focus on getting power.

Author:  badhairdave [ Tue Sep 01, 2009 11:27 am ]
Post subject: 

SRS13 wrote:
badhairdave wrote:
Just remember that the 277rwkw power figure was with e85, the PULP figure was 258 from memory.

I'll have my ex gate 3071 results sometime next week. Should be an interesting comparison.

I'm running unigroup spec'd baby cams rather than off the shelf tomei or hks which have been giving some good results lately. I've kept the cams small to try and keep the power band within the stock rev range.


The 277rwk was also with 22psi.

Dave are you running the T3 version? If it makes good power I would be so tempted...

Upgrade your brakes, get some sway bars, maybe some coilovers or a good spring/shock combo and make it stop and handle. Then focus on getting power.


Yeah, t3 version. You already have a 2835 don't you? I don't think you'd see enough of a change to warrant the dollars

Page 1 of 3 All times are UTC + 10 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/