Silvia Club of NSW
https://forum.silviansw.com/

correct offsets for s13
https://forum.silviansw.com/viewtopic.php?f=2&t=30186
Page 1 of 1

Author:  Grover [ Tue Mar 04, 2008 9:13 pm ]
Post subject:  correct offsets for s13

I'm looking for rims for my s13, but every time i find something i like and contact the dealer I am told the offsets are incorrect. I was going to buy a set of 18" lenzo wide tracks, untill i found out just that. So now i'm looking at BBoss elanoor's Which are 19" by 8" with a offset of +35.
Does anyone have anything similar or know if theese will fit in the guards of a s13, i dont want to flare or roll the guards either, even if ppl could just post what wheel sizes they have and how well they fit i want to know the biggest that will fit without major modification.

Author:  Phillb [ Tue Mar 04, 2008 11:34 pm ]
Post subject:  Re: correct offsets for s13

Grover wrote:
I'm looking for rims for my s13, but every time i find something i like and contact the dealer I am told the offsets are incorrect. I was going to buy a set of 18" lenzo wide tracks, untill i found out just that. So now i'm looking at BBoss elanoor's Which are 19" by 8" with a offset of +35.
Does anyone have anything similar or know if theese will fit in the guards of a s13, i dont want to flare or roll the guards either, even if ppl could just post what wheel sizes they have and how well they fit i want to know the biggest that will fit without major modification.


Skip both of those options and find some REAL Jap wheels that are 4/5 stud in 17's or 18's x8F/9R with an offset of about +30.
That will be perfect for your S13 and should still sit flush with the guards instead of Temple of Chrome that looks sunken like a WWII battleship :P :wink:

Author:  chindodood [ Thu Mar 06, 2008 3:55 pm ]
Post subject: 

+32 i think

Author:  JayS14 [ Thu Mar 06, 2008 7:43 pm ]
Post subject: 

^ Fuck that...

+ 17 :P

Author:  too_much_boost [ Thu Mar 06, 2008 8:01 pm ]
Post subject: 

9in wide +9 offset ftw

Author:  JayS14 [ Thu Mar 06, 2008 8:11 pm ]
Post subject: 

^ Fuck yeah.

Author:  badhairdave [ Thu Mar 06, 2008 9:45 pm ]
Post subject: 

too_much_boost wrote:
9in wide +9 offset ftw


yeah

Image

Author:  too_much_boost [ Thu Mar 06, 2008 9:47 pm ]
Post subject: 

I really should polish the dish up a bit on those rims

Author:  v1jilante [ Thu Mar 06, 2008 10:00 pm ]
Post subject: 

too_much_boost wrote:
I really should polish the dish up a bit on those rims


I take it thats your rim then - is it a weds? (from the look of the spoke)

I've used wet'n'dry and then metalsol before, but the rims already had no clear coat (well SFA anyway), is there no option but to pretty much remove the clear coat to get that scheizer off?

Author:  I Like Drift [ Mon May 19, 2008 6:19 pm ]
Post subject: 

http://www.nissansilvia.com/forums/inde ... pic=271829

that pretty much show's what can and cant be fitted on basically any nissan, mainly the S series chassis, what looks good and what doesn't, currently at 40 pages

Author:  RPS13_ [ Sat Oct 10, 2009 5:26 pm ]
Post subject: 

v1jilante wrote:
too_much_boost wrote:
I really should polish the dish up a bit on those rims


I take it thats your rim then - is it a weds? (from the look of the spoke)

I've used wet'n'dry and then metalsol before, but the rims already had no clear coat (well SFA anyway), is there no option but to pretty much remove the clear coat to get that scheizer off?


muddy ghetto style not lookin too bad mate
lol

Page 1 of 1 All times are UTC + 10 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/