| Silvia Club of NSW https://forum.silviansw.com/ |
|
| R200 VISCOUS DIFF TIGHTENING https://forum.silviansw.com/viewtopic.php?f=12&t=35220 |
Page 1 of 1 |
| Author: | MR DATO [ Tue Nov 08, 2011 9:48 pm ] |
| Post subject: | R200 VISCOUS DIFF TIGHTENING |
How you going? I was wondering if you guys can help me. I have a R200 diff that needs tightening. Ive read the post on Datnet (datsun website) on how to tighten it but when i pulled my diff apart the inside of my viscous diff was totally different to the viscous diff described. The diff described had a shim inside where as mine has a series of metal plates stacked ontop of each other on the inside. The shim which i bought for my diff is smaller in diameter from the inside where my diff requires one larger in diameter. Is it possible to get a shim that is wider in diameter? If you can help me it would great. If you need further information let me know. Thanx |
|
| Author: | DumHed [ Wed Nov 09, 2011 7:23 am ] |
| Post subject: | |
can you take a picture of it? bit hard to work out without seeing it. |
|
| Author: | Tiop [ Tue Jan 17, 2012 9:15 pm ] |
| Post subject: | |
shim = fail for viscous |
|
| Author: | A'PEXi [ Tue Mar 20, 2012 10:57 pm ] |
| Post subject: | Re: R200 VISCOUS DIFF TIGHTENING |
try this - http://www.skylinesaustralia.com/forums ... -r33-gtst/ |
|
| Page 1 of 1 | All times are UTC + 10 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|