Silvia Club of NSW

ok heres what i did ...firstly in the pictue above there are 3 plugs the largest of the 3 has a thick wire ..thicker than all the others this is the cable you need to apply voltage to..

splice that wire (dont cut it ) run a cable from there to the drivers side fuse box in the engine bay and find a 12v that only comes on with the ignition on the reds

now splice the wire that has the 12v when the ignition is on and join it up with that wire you ran

test it out and you should now have spark

if all is good neaten up the wiring and put a bosch relay in the chain not overly important but it removes the danger of ovrloading existing wiring if there is a short down the track

_________________

Cruise & Event Photos: http://hilariousmotorsport.com
DJ FOR HIRE . NRG HOUSE RNB , 18S 21ST ANY OCCASION