Silvia Club of NSW

ECUTalk v1.3.3 - Changes from v1.3.3 beta4 below:

• #42 Removed console output for few users who have a console setup on their PPC
• #55 Trip meter sensors shouldn't keep 'counting' while car is turned off
• #58 Prevent 'clicking' show gauges button with keyboard when gauges already shown
• #69 PPC users can now utilise the 'working area' option and the LTRB option (ini setting)
• #70 Changed default 100ms max refresh to 40ms (equivalent of 25fps)

Complete list of changes from v1.3.2 on the Version History page.

back in june v1.3.4 was released which was a minor release, just allowing COM10-COM19 ports to be used, and also alternative ECU ID (e.g. E7 instead of EF) to be used.

there is a beta of ECUTalk v1.3.5 which adds alerts - define alerts for battery voltage, temperature, injector duty cycle, speed, airflow and RPM, and the gauge will flash (invert colours) and beep if an alert is hit

ECUTalk v1.3.4 - Changes from v1.3.3 below:

• #90 Allow user to edit ECU ID for initialisation
• #93 COM10 and above dont work in ECUTalk

ECUTalk v1.3.5 beta - Changes from v1.3.4 below:

• #3 User definable warning levels for sensors
• #99 TB45E engine does not have bank1 injectors, swap with bank2

v1.3.5 beta can be downloaded here: http://www.ecutalk.com/downloads/ECUTalk_v1.3.5_beta.exe

ECUTalk v1.3.5 beta3 which adds proper support for diesel engines, including diesel specific sensors, also update to error codes.

ECUTalk v1.3.5 beta3 - Changes from v1.3.5 beta1 below:

• #105 Add extra sequential index column to logging
• #108 Russian language has trouble changing alert values
• #109 Add basic compatibility for diesels
• #110 Differentiate between petrol/diesel (as some sensors are shared)
• #111 Russian Update error codes (for both petrol and diesel)

v1.3.5 beta3 can be downloaded from latest news post here: http://www.ecutalk.com

ECUTalk v1.3.5 beta6 has been released, which heaps of switch/solenoid sensors.

ECUTalk v1.3.5 beta6 - Changes from v1.3.5 beta3 below:

• #18 Display switch/solenoid etc sensors

Of the added switch sensors, 8 are common to petrol/diesel engines, 39 specific to diesel engines, and 39 specific to petrol engines. Each individual engine only supports a subset of these though, around 10-20 on average. ECUTalk v1.3.5 beta6 can be downloaded from latest news post here: ECUTalk

ECUTalk v1.3.5 final has been released (along with beta 7 before it), which mainly just adds support for Active Suspension control unit (on Q45 Infiniti and similar) amongst other minor changes:

ECUTalk v1.3.5 final - Changes from v1.3.5 beta6 below:

• #113 Make log files .csv rather than .txt
• #114 Provide minimum log update functionality
• #115 Attempt ED connection if EF fails
• #116 Add support for Active Suspension control unit
• #117 Fix 'Code 55' for Diesel to say 'No Errors Detected'
• #118 Remove Flush Wait Time option (still in .ini)
• #119 Support unlisted serial port names via ini file
• #120 Add dec points to Height sensor (inches)/MPG

ECUTalk v1.3.5 can be downloaded from here.

awesome!

Will have to check it out now that I have a car with consult again

_________________
The Engine Whisperer - fixer of things

these dont work on V35s and M35s do they?

they are consult3 if that helps

_________________
M35 Stagea.info @ http://www.m35stagea.info/

No, sorry, only the original consult vehicles (up to R34). Check out blazt/datascan2 i think it works with some of the v35 range.

thanks mate, unfortunately it doesnt work with ours

the greddy informeter does, which is what i have at the moment

_________________
M35 Stagea.info @ http://www.m35stagea.info/

thats via OBDII i'd assume? does that mean scangauge should work?

its different i think, it talks CANBUS or something else.

_________________
M35 Stagea.info @ http://www.m35stagea.info/