Silvia Club of NSW
https://forum.silviansw.com/

Stereos - S14 Speaker and deck Install
https://forum.silviansw.com/viewtopic.php?f=11&t=11447		 Page 1 of 1
Author:  Hicboy2k1 [ Sat Sep 11, 2004 7:38 pm ]
Post subject:  Stereos - S14 Speaker and deck Install
I have a few questions so hopefully someone can help me out. First question what size speakers are in my 95 s14 i think they are a 6 1/2 in component set in the front and 6x9's in the rear? Second question my car has a factory amplified kenwood 6 speaker system in it do i have to rewire the whole car and bypass the factory amp when installing a new deck and speakers? and lastly The factory deck is a double din unit will any aftermarket dash kit for a 95 240 work in my dash? if not which one do i need. Any help on these topics would be greatly appreciated.




thanx :evil:
Author:  fergo308 [ Mon Sep 13, 2004 8:19 pm ]
Post subject: 
factory S14 speakers are 6 1/2" rounds front and rear. 6x9's are NOT a bolt in proposition for the rear.

6 1/2" splits will pretty much bolt in to the front doors,the rears will need a custom thin MDF baffle depending on the size of the speaker's ring,as the holes are closer to 6 3/4".

pretty much any std double DIN head unit will bolt into the dash.

the amplified system you're referring to isn't available here,so I can't say much about it but I would GUESS that it'll only be a very low powered setup,and wouldn't be up to the task where current sound quality and power handling are concerned.
also,the std wiring is less than perfect,so my advice would be to do the lot from scratch,with quality equipment.


Justin...
Author:  Hicboy2k1 [ Mon Sep 20, 2004 2:01 am ]
Post subject: 
Thanx For the info! :lol:
Page 1 of 1 All times are UTC + 10 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/