Silvia Club of NSW https://forum.silviansw.com/ |
|
Swapping housings on GT2871r https://forum.silviansw.com/viewtopic.php?f=1&t=33009 |
Page 1 of 1 |
Author: | Killabeez [ Wed Mar 25, 2009 4:07 pm ] |
Post subject: | Swapping housings on GT2871r |
Heya, I have a rooted 2871r and might be getting another but the exhaust housing is 0.86 and mine is 0.64, It also has an S15 style front housing while mine is a 3 inch bellmouth. Does anyone know if I can swap 1 or even both of the housings over with ease? By easy I mean it wont require any special tools or re-balancing? Cheers |
Author: | too_much_boost [ Wed Mar 25, 2009 5:10 pm ] |
Post subject: | |
If the 2 turbos have the same trim front wheel, then it is a fairly simple job. You do have to be careful not to damage the wheels in the process. The exhaust housing might need a scary amount of force to get off if its rusted on. Tools required are spanners and mallet |
Author: | Killabeez [ Wed Mar 25, 2009 5:16 pm ] |
Post subject: | |
sweet I'll find out. As far as I know all 2871r's have 71mm comp wheels |
Author: | too_much_boost [ Wed Mar 25, 2009 5:20 pm ] |
Post subject: | |
Hence me saying different Trims. There is more than one important measurement on a compressor wheel. There are 3 compressor trims available for the 2871 - 48, 52 and 56 |
Author: | Killabeez [ Wed Mar 25, 2009 6:40 pm ] |
Post subject: | |
ah ok, I'm not sure what trim it is, is there some way to tell? comp cover says A/R 60, the rest is pretty hard to read since its a low mount |
Author: | too_much_boost [ Wed Mar 25, 2009 6:42 pm ] |
Post subject: | |
Look at the tag on the core of the turbo |
Page 1 of 1 | All times are UTC + 10 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |