Silvia Club of NSW https://forum.silviansw.com/ |
|
s14a / s15 turbos https://forum.silviansw.com/viewtopic.php?f=1&t=28963 |
Page 1 of 1 |
Author: | SXI-180 [ Wed Oct 31, 2007 7:14 am ] |
Post subject: | s14a / s15 turbos |
Apologies if it has been covered before, but are theyre any differences?, Or they are totoally identical?. |
Author: | DeLuxe [ Wed Oct 31, 2007 11:52 am ] |
Post subject: | |
Physically, on the local models anyway. There is a small raised divider between the exhaust wheel and wastegate flap on the s15 model. |
Author: | ky0 [ Sun Jan 06, 2008 8:40 pm ] |
Post subject: | |
in regards to jdm s15 and audm s15s, the audm is bush bearing t28, whereas jdm is ball bearing (t28bb) |
Author: | radism [ Thu Feb 07, 2008 2:26 pm ] |
Post subject: | |
stolen from another forum. '90-'94 N14 Pulsar GTi-R Redtop 8.3:1 169 kW (227 HP) @ 6400 rpm 203 ft·lbf @ 4800 rpm T-28 79 Trim, .86 A/R Housing '91-'93 S13 Silvia, 180sx Redtop 8.5:1 151 kW (202 HP) @ 6000 rpm 203 ft·lbf @ 4000 rpm T-25G 7psi 62 trim 53.8 mm .80 A/R housing '94-'98 S13 180sx Blacktop 8.5:1 151 kW (202 HP) @ 6000 rpm 203 ft·lbf @ 4000 rpm T-25G 7psi 62 trim 53.8 mm, .80 A/R housing '95-'99 S14 Silvia, 200sx Blacktop 8.5:1 162 kW (217 HP) @ 6000 rpm 203 ft·lbf @ 4800 rpm T-28 62 trim 53.8 mm, .64 A/R housing, bush bearing '99-02 S15 Silvia, 200sx Blacktop 8.5:1 183 kW (245 HP) @ 6400 rpm 202 ft·lbf @ 4800 rpm T-28 60 trim 60 mm, ball bearing, Inco turbine wheel |
Author: | oRiCLe [ Thu Feb 07, 2008 2:44 pm ] |
Post subject: | |
some s15 ADM came out with Ball Bearing i heard, i bought a turbo setup off a ADM S15 engine and ended up with BB... |
Author: | chindodood [ Sun Mar 09, 2008 11:54 pm ] |
Post subject: | |
yeah my car had a t28bb n its adm s15 ________ RZ ENGINE |
Page 1 of 1 | All times are UTC + 10 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |