Silvia Club of NSW

Does anyone know much about the TD-06 ?
i know its non-BB .. and i think its equivalent to a T04
What is its HP rating .. and how would it go on a SR with an external wastegate ?
ohh and i know it needs a cutom manifold

Thanx

Have a look at the JMS website. Denzo's old onevia had a Trust TD06 20G with external wastegate on his RB20DEt and was a consistant 250 kw@rear wheels dyno performer. Come to think of it I think I saw the turbo for sale on the site.

http://www.japanesemotorsport.com.au/partsinstock4.htm

Performance should be similar on a SR20, would be good for mid twelves at worst.

That should give an indication of the 20G, but it comes it 25G trim which is a larger exhaust housing. More lag but more top end.

_________________
S13 Silvia Tuning - The Definitive SR20 Modifying Site

It would be ok for outright power but fangability would be a bit off due to the lag. Start boostin at like 4000 but geez it would hit you. Wonder how long everything would last......

_________________
"The opinions expressed by QIK180 are not necessarily the opinions of anyone"

there was sum guy on the performance forum wantin to sell his TD06...
Came with HKS external wastegate and manifold...
but dunno wat happened to it.. it was there last week..

It is still there. the guy hasn't sold it yet, but won't tell anybody how much he wants for the package

_________________
Disclaimer: I actually DO know everything

Sil80 - SR20DET 231rwkw
Silvia Race Nugget - SR20DET 225rwkw
Stagea - DeathWagon - RB25DET 185rwkw.

My Lame Gallery: http://www.toomuchboost.com/gallery/main.php

he wants $2900 for the package.

dunno if that is worth it .. cause at JMS you can get the turbo for 1600, a manifold cant be much more than $1000 to get one made and the wastegate a few hundred ..

2900 is a bit steep i reckon.

2000 maybe

shpeedie - seriously i wouldn't buy a turbo without looking at it first for the obvious signs of damage. If you do ensure a warranty or return policy so you dont get screwed.

_________________
"The opinions expressed by QIK180 are not necessarily the opinions of anyone"

yeah .. it seemed like an interesting idea at the time .. but i wouldnt get it .. i cant wait to hit boost at 4500 rpm .. i need to be spooling quickly !!!
and yeah .. i would definately want to see what condition it is in !!

*cough*, $1000 for the manifold?? where? unless it's 2nd hand.
brand new manifold will set you back anywhere between $1.6-2.5gz depending on the compound it's made from.

_________________
2b00stSX

hade one made up the other week from steam pipe and it cost $700!!!! including fitting. I dont want to hear any crap that steam pipe is not as good cause thats rubbish.

_________________
What you had? Reach for the lasers. Safe as f**k!

hmm .. where did you get the manifold made at ??

it was actually a friend of mine who got it done, ill get the details and get back to you, they did a REAL neat job too.

_________________
What you had? Reach for the lasers. Safe as f**k!

when you say TD-06.. you must also state the compressor designation =) as you can have small arse 17c thru 25g? or something big =P

second hand, pay no more than $1,300 me thinks. brand spanking new gt30 is around the $2,100 mark. and its NEW and twin ball bearing =)

i'd far rather pay for extra money for a NEW unit =) not to mention you can then have it spec'd to any application you require..

I can get steam pipe manifolds made for around the 400 mark. stainless about an extra 100