Silvia Club of NSW https://forum.silviansw.com/ |
|
My TD06 kit for my ca :) pics (56k beware ;) ) https://forum.silviansw.com/viewtopic.php?f=1&t=12922 |
Page 2 of 4 |
Author: | Risking [ Wed Nov 24, 2004 6:22 pm ] |
Post subject: | |
My stupid I didnt notice the page went further to the side Looks like a good kit. |
Author: | xris [ Thu Nov 25, 2004 10:14 am ] |
Post subject: | |
lol yeh not bad ended up costing me $1800 + the $1020 to get the turbo fixed. so $2820 all up. |
Author: | Risking [ Thu Nov 25, 2004 5:32 pm ] |
Post subject: | |
Thats not to bad at all. Mine was 2400 i think, with 270 tomei cams then 660 to recon the turbo and gate. I didnt get a dump pipe though ahd to make my own which turned out okay. |
Author: | LordNafe [ Fri Nov 26, 2004 12:01 pm ] |
Post subject: | |
While we're bragging about turbos, I received my new one today Nothing flash, just a T25G, but it's a marked upgrade from a T25 that's shitting itself PLUS it is in bloody perfect condition I'm very happy Now I need to organise for it to be fitted...... |
Author: | xris [ Fri Nov 26, 2004 12:05 pm ] |
Post subject: | |
pics or ban hahaha, |
Author: | LordNafe [ Fri Nov 26, 2004 12:19 pm ] |
Post subject: | |
Lol. I'll take some on the weekend It literally only jsut arrived in the mail at work, so you'll have to sit tight Not quite as big as the TD06, but I'm still excited |
Author: | DumHed [ Fri Nov 26, 2004 1:13 pm ] |
Post subject: | |
hmm sounds like I'll have to start posting some pics of my new turbo too It's a kind of DIY hybrid using an IHI VF23 (from an STi) and some leftover bits from a dead Apexi AX53B60. Should be about equivalent to an HKS GT2530. |
Author: | wild_180 [ Fri Jan 21, 2005 4:35 pm ] |
Post subject: | |
hey man, is that bigger then mine i got a HKS 30-37S? ur CA will be wild when its running. Mine is running like a weapon these days. |
Author: | xris [ Fri Jan 21, 2005 4:43 pm ] |
Post subject: | |
Its not as big i dont think alittle smaller (450ps i think). just ordered some sard 800cc injectors from japan not long to go until its finished. |
Author: | STR8E180 [ Sun Jan 23, 2005 11:19 am ] |
Post subject: | |
looking at that photo of ur exhaust manifold it doesnt look like ur gonna be spooling that turbo up very soon my mate has the same kit but for a Sr20 and he hates the lag on it after its all bolted up let us know it all goes huh. |
Author: | Risking [ Sun Jan 23, 2005 7:03 pm ] |
Post subject: | |
i was using the exact same manifold on my CA. Id have full boost by 3500rpm without a problem. The extra capacity helped a bit but should not be that bad. |
Author: | sldwys_200sx [ Fri Mar 10, 2006 6:16 am ] |
Post subject: | |
Hey guys newbie to this site here, im from snz which is silvia new zealand,Wow, same turbo kit as my ca, i brought a kit from japan it came with, HKS Cams, HKS adjustable cam gears, Trust W/G, Greddy manifold, TD06-19c Turbo (by the way yours is a td06-19c aswell which is a 19cm exh. housing) HKS 555cc Injectors, HKS 3 layer Metal Headgasket,, ARP Head studs, 3 INCH dump pipe, Z32 AF meter and a Tuned Computer, i payed New Zealand 3000, didnt have to rebuild any of it all in mint condition, since i have brought that i have also gotten, ACL Forged Race Pistons and Bearings, Arp Conrod Bolts, and a few extra lil bits n pieces! Should be putting out about 420HP from my ca18det, Let me know how yours goes, If your interested go to www.nissansilvia.co.nz go to the forums, then go to general discussions and look my my ca18det 200sx build up under the same user name |
Author: | too_much_boost [ Fri Mar 10, 2006 6:26 am ] |
Post subject: | |
sldwys_200sx wrote: TD06-19c Turbo (by the way yours is a td06-19c aswell which is a 19cm exh. housing)
The 19C has absolutely nothing to do with the size of the exhaust housing. The 19c refers to the compressor wheel xris's turbo is definately a td06-20g as it has a td06 rear end and a 20g front end |
Author: | xris [ Fri Mar 10, 2006 8:40 am ] |
Post subject: | |
and the engine is still not in the car hahaha. one year after posting this thred. alots happened with the engine its only about 1 month away from being complete now (well its built just have to finish painting the car and get it in) heres a few pics The cam covers are just there to keep the crap out. heres a list of what has been done to the head Head has been port and polished. machined flat. Competition Valves Australia Custom Stainless Exhaust valves Tomei Solid lifter + shims Tomei Valve springs Tomei 270degree x 9.25mm lift Cams (IN and Ex) Tomei 1.5mm metal head gasket JUN Titanium Valve Retainers JUN Race Spec Valve Guides ARP Head Studs Match ported intake runners with butterflys removed and holes welded up Sard 800cc Twin Jet Injectors Custom Inlet Manifold with XF (65mm) Throttle body with TPS I have test fitted the turbo in the engine bay and it sits abit too low behind the engine stand so im going to have to get the manifold modified (as it had already been redone just before the turbo) and lifted up etc. i will be getting this done by Dalton Automotive in geelong. New dump pipe made up and cooler pipes to fit the intake plenum and new turbo setup. Ive stitch welded the engine bay and am currently in the process of prepping it to be sprayed. this should be done in the next few weeks. by next month it should be down at dalton getting a microtech lt10s installed finally. |
Author: | ZEi250t [ Fri Mar 10, 2006 8:44 am ] |
Post subject: | |
Nice shopping list you HAVE to post the results of this one. Maybe you can prove to the SR gang that CAs can make good power |
Page 2 of 4 | All times are UTC + 10 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |