Silvia Club of NSW https://forum.silviansw.com/ |
|
Your input on boost gauge install, (now with concern)... https://forum.silviansw.com/viewtopic.php?f=1&t=12074 |
Page 1 of 1 |
Author: | JC [ Thu Oct 07, 2004 8:44 pm ] |
Post subject: | Your input on boost gauge install, (now with concern)... |
Time has come im gonna put one in before other mods, so I can see wats goin on with my snail. Now, I need to hook up to the vaccum line? same one that goes into the bov? Yay or nay? Any thing you can add?? |
Author: | RobO [ Thu Oct 07, 2004 10:15 pm ] |
Post subject: | |
The closer to the throtle body the better. The most popular one is the one that plugs into the fuel reg. |
Author: | JC [ Fri Oct 08, 2004 3:23 pm ] |
Post subject: | |
Fuel regulator? why there?, is it the most accurate place or is it just the easiest place for it being popular?? |
Author: | ucb05t [ Fri Oct 08, 2004 8:46 pm ] |
Post subject: | |
Just get a T piece, that's the easiest way. Any vacum hose that comes off the manifold will do... |
Author: | JC [ Wed Oct 13, 2004 5:23 pm ] |
Post subject: | |
I played around with it connecting it up. My only concern is that I done wat was pictured and the nylon tubing can be easyly pulled out of where the nuts connect, is this normal? or have I over looked something?? It says; sealing nut- ferrule- adapter- gauge, but the tubing can come straight out leaving everything behind. Btw this is for a autometer mechanical boost gauge. EDIT: I was talking to a mate who had a similar autometer gauge but liquid filled, and he said he was able to swing his around by the vacuum hose. I was thinking maybe its suppose to be loose at first to allow the hose to expand. |
Author: | badhairdave [ Wed Oct 13, 2004 7:09 pm ] |
Post subject: | |
Did you put the little bead thing that fits over the nylon line in there? Mine was tight when i instaled it. |
Author: | JC [ Wed Oct 13, 2004 7:27 pm ] |
Post subject: | |
Yeah i did, it says in the diagram; vacuum line, sealing nut, ferrule (might be that bead thingy you said), adapter that connects to gauge. Btw, how tight did you do it up? EDIT: It reeeaaalllyy needs to be screwed in hard to grab. Thanks all |
Page 1 of 1 | All times are UTC + 10 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |